JVC TM-2000SU TM-1600SU, TM-2000SU monitor instruction manual (318KB) - Page 7

HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE SCREEN MODE (SETTING) You can set the following menu items. Set them depending on your needs. • SHARPNESS • COLOR TEMP. • COLOR SYSTEM • ASPECT RATIO • BRIGHTNESS P.S. 1. Press the MENU button. The screen is displayed. screen 1 < MENU > ‰ SHARPNESS : 00 COLOR TEMP. : 6500 COLOR SYSTEM : AUTO ASPECT RATIO : 4-3 BRIGHTNESS P.S. : OFF 2 3 MENU 2. Press the PHASE ( ) or CHROMA ( to select MENU items. ) button EXIT 4 A selection mark (3) is put next to the selected item. PHASE CHROMA SHARPNESS COLOR TEMP. COLOR SYSTEM ASPECT RATIO BRIGHTNESS P.S. Front panel button Function displayed Contents PHASE ( ) ∞ Advance selection mark (3) CHROMA ( ) 5 Reverse selection mark (3) 3. Press the VOLUME/SELECT button to set. - + VOLUME/SELECT Front panel button VOLUME/ SELECT (+) VOLUME/ SELECT (-) Function displayed Contents + Increase (to max. value) 3 Advance the setting value - Decrease (to min. value) 2 Reverse the setting value Menu items SHARPNESS COLOR TEMP. COLOR SYSTEM Purpose Picture sharpness Color temperature of white balance Color system Setting range 00 +1 +2 +3 +4 +5 6500 9300 AUTO NTSC AUTO PAL ASPECT RATIO Aspect ratio 4 - 3 16 - 9 BRIGHTNESS Brightness Peak P.S. Suppressor function OFF ON * Normally set the COLOR SYSTEM to the AUTO mode. If reception in the AUTO mode is not good, set it to the exclusive mode (NTSC or PAL) corresponding to the received color system. 4. If you want to set the other menu items, repeat procedures 2 and 3. 5. Press the MENU button to quit. Front panel button Function displayed Contents MENU MENU EXIT Quit (or Release) the screen - + PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT 1 Selection mark (3): Indicates the menu item you select. 2 Menu item: Menu items you can select. 3 Setting display: Indicates the current settings (value). 4 Function display: The functions of the front panel buttons (7 buttons on the left.) correspond to the function displayed. Function displayed Contens ∞ Advance the menu item. 5 Reverse the menu item. - Lower the adjustment value. (to the minimum) + Raise the adjustment value. (to the maximum) 3 Advance the setting value. 2 Reverse the setting value. EXIT Exits the screen. Notes: ● BRIGHTNESS P.S. (or B.P.S.) stands for Brightness Peak Suppressor. This function is used to suppress (cut) the white peak portion of the picture, so as to reduce the picture's burning on the screen (cathode ray tube). ● When the BRIGHTNESS P.S. (or B.P.S.) function is ON, the suppressed white peak portion (for example, the lit part of a fluorescent lamp) seems to be blurred. If required, lower the setting for the B.P.S. LEVEL in the screen mode, or turn off the BRIGHTNESS P.S. function. ● When the screen aspect ratio is set to 16-9 (16:9) the picture will be vertically reduced. ● When setting value of ASPECT RATIO or BRIGHTNESS P.S. is set to REMOTE, REMOTE SELECT is activated in the mode, change the setting in this case. When required, use the external control function or turn off the REMOTE SELECT setting. 7