JVC TM-2000SU TM-1600SU, TM-2000SU monitor instruction manual (318KB) - Page 9

Set-up menu items H. POSITION V. POSITION WHITE BALANCE DRIVE R.DRIVE G.DRIVE B.DRIVE CUT OFF R. CUT OFF G. CUT OFF B. CUT OFF CONTROL LOCK B. P. S. LEVEL REMOTE SELECT Purpose Adjusts the horizontal position of the screen (+ : Horizontal position shifts to the right/-: Horizontal position shifts to the left) Adjusts the vertical position on the screen (+: Vertical position moves down/-: Vertical position moves up) Adjusts the white balance Adjusts red level Adjusts green level Adjusts blue level Adjusts red cut off Adjusts green cut off Adjusts blue cut off Sets the operation buttons on the front panel to control lock mode Sets the level for Brightness Peak Suppressor function Sets the external control function (ASPECT RATIO or BRIGHTNESS P.S.) Settings -09 -08 01 00 +01 08 +09 -09 -08 01 00 +01 08 +09 Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment. Screen setting is changed to the selected setting mode. Select R/G/B buttons corresponding to the function display to adjust. -09 -08 01 00 +01 08 +09 -09 -08 01 00 +01 08 +09 -09 -08 01 00 +01 08 +09 -09 -08 01 00 +01 08 +09 -09 -08 01 00 +01 08 +09 -09 -08 01 00 +01 08 +09 OFF ON 00 01 09 10 11 19 20 OFF ASPT OFF B.P.S. * ASPT : ASPECT RATIO B.P.S.: BRIGHTNESS P.S. 4. To set the other set-up menu items, repeat the procedures 2 and 3. 5. Press the MENU button to quit. Front panel button Function displayed Contents MENU MENU EXIT Quit (or Release) the screen Notes: ● When the CONTROL LOCK function is set to ON, pressing operation buttons on the front panel will display the message "CONTROL LOCK ON!" on the screen for about 3 seconds. ● The CONTROL LOCK function is maintained even when the power is turned off. ● To turn off the CONTROL LOCK function, while holding the MENU button press the PHASE button. Then set the CONTROL LOCK function to OFF. ● Even when the CONTROL LOCK function is set to ON, the following operations are available: - Power Switch operation. - Sound volume adjustment with the VOLUME/SELECT button. - Display or disappear of the screen. - External control of ASPECT RATIO or BRIGHTNESS P.S. when REMOTE SELECT is set to ON . 9