JVC TM-2000SU TM-1600SU, TM-2000SU monitor instruction manual (318KB) - Page 8

HOW TO USE THE MENU FUNCTIONS (cont'd) DISPLAY AND SELECTIONS IN THE MODE (SETTING) You can set the following set-up menu items. ● H. POSITION ● V. POSITION ● WHITE BALANCE ● CONTROL LOCK ● B.P.S. LEVEL ● REMOTE SELECT Notes: ● Parameters for H. POSITION and V. POSITION can be set separately depending on the video input (Input A (VIDEO), Input B (VIDEO) or Input B (Y/C)) selected by the input select buttons on the front panel. Select the required video input with the input select buttons on the front panel in advance. ● WHITE BALANCE can be set individually at 6500 or 9300 for the color temperature value. Set COLOR TEMP. to the value 6500 or 9300 in the screen in advance. 1. While pressing the MENU button, press the PHASE ( ) button. The screen is displayed. PHASE MENU 2. Press the PHASE ( ) or CHROMA ( ) button to select the desired menu item. A selection mark (3) is put next to the selected item. PHASE CHROMA H. POSITION V. POSITION WHITE BALANCE CONTROL LOCK B.P.S. LEVEL REMOTE SELECT Front panel button Function displayed Contents PHASE ( ) ∞ Advance selection mark (3) CHROMA ( ) 5 Reverse selection mark (3) 3. Press the VOLUME/SELECT button to set. - + VOLUME/SELECT Front panel button VOLUME/ SELECT (+) VOLUME/ SELECT (-) Function displayed Contents + Increase (to max. value) 3 Advance the setting value CUTO Selects CUT OFF setting screen - Decrease (to min. value) 2 Reverse the setting value DRV Selects DRIVE setting screen Note: ● For the WHITE BALANCE setting, select the CUT OFF or DRIVE setting screen, then select the buttons (PHASE/ CHROMA/BRIGHT) corresponding to the function indicated (R/G/B). screen 1 ‰ H. POSITION : 00 V. POSITION : 00 WHITE BALANCE CONTROL LOCK : OFF B. P. S. LEVEL : 10 REMOTE SELECT : OFF 2 3 EXIT 4 - + PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT 1 Selection mark (3): Indicates the menu item you select. 2 Menu item: Menu items you can select. 3 Setting display: Indicates the current settings (value). 4 Function display: The functions of the front panel buttons (7 buttons on the left.) correspond to the function displayed. Function displayed Contens ∞ Advance the menu item. 5 Reverse the menu item. - Lower the adjustment value. (to the minimum) + Raise the adjustment value. (to the maximum) 3 Advance the setting value. 2 Reverse the setting value. Exit the EXIT screen (release) DRV Selects DRV adjustment Selects CUT OFF CUTO adjustment R Adjusts red signal level G Adjusts green signal level B Adjusts blue signal level DISP Turns the ON-SCREEN display on or off. (This function is effective only in the DRIVE or CUT OFF adjustment mode.) 8