JVC VN-C3WU Instruction manual on the VN-C3WU Vnetworks camera (938,203 bytes, - Page 11

VN-C3WU Installation and Setup Before starting installation and setup It is necessary to set an IP address for each VN-C3WU unit. Use the following procedure for the setup of individual units. (If the power is not turned on, the installation operation can be performed at one time.) 1. Install the VN-C3WU. Only in cases of installation in a location where the power cannot easily be turned on, complete steps 2 to 4 before installing. 2. Connect the VN-C3WU to a network. (With the VN-C3WU power turned on.) 3. Set the VN-C3WU IP address. When setting the VN-C3WU IP address, be sure to contact the network manager for assignment or approval. 4. Alarm IN/OUT connection. 5. VN-C3WU access test. This test is performed after any change to confirm the IP address. Names of VN-C3WU parts Rear view Side view Lens unit Front view Lens cover DC IN jack 10BASE-T port Body Alarm IN/OUT jack DC12V 10BASE-T 11