JVC VN-C3WU Instruction manual on the VN-C3WU Vnetworks camera (938,203 bytes, - Page 20
be changed unless it matches the Administrator level password.
View all JVC VN-C3WU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Other Settings [Program version] The version of the VN-C3WU main unit firmware. Cannot be changed. [Power Frequency] This setting reduces the amount of flicker under fluorescent lighting. Set to 50Hz or 60Hz in accordance with the power frequency at the installation location. [Password] Specify using up to 8 letters. Enter (re-enter) the same password two times in each level for confirmation purposes. [Auto Refresh] Specify Pan/Tilt position display in the (Control page) and (Configration page) is automatically refreshed or not. [Cache Settings] Only a few of the proxy servers in Cache Settings cache Cgi; therefore, Pan/Tilt control occasionally does not operate correctly. In such cases, check Cache Disable. Password function An access protection using a password is provided to regulate connecting PCs (users) connected to the VN-C3WU. This access protection function has three levels to match the access levels. The pages that can be accessed at each of these levels are as shown below. (Refer to page 22 for the VN-C3WU web page configuration.) Password level Accessible page User level Still Image page and Live Image page. Operator level The above pages and (Pan/Tilt) control page. Administrator level The above pages and Settings page. Caution Never forget the current password because the password setting cannot be changed unless it matches the Administrator level password. Caution A password will not be requested when only a user level or operator level password has been set but an administrator level password has not been set. 20