Jenn-Air JGD8130ADS Installation Instruction - Page 6

TO CONVERT APPLIANCE FOR USE WITH PROPANE GAS Natural Gas To Propane Gas (LP) Conversion Instructions WARNING Propane Gas conversion is to be performed by a Jenn-Air Authorized Service Contractor (or other qualified agency) in accordance with the manufacturer's instructions and all codes and requirements of the authority having jurisdiction. Failure to follow instructions could result in serious injury or property damage. The qualified agency performing this work assumes responsibility for this conversion. WARNING ELECTRICAL POWER AND GAS MUST BE TURNED OFF PRIOR TO CONVERSION LR CR RR RF Models - JGD8130 & JGD8345 Series Manifold - Propane Gas pressure required - 10² W.C. Incoming Propane Gas pressure required to appliance pressure regulator - 11² - 12² W.C. Propane Gas conversion orifice hoods are supplied with these models. Propane Gas input specified - JGD8130/JGD8345 33,000 BTU/hr / 51,000 BTU/hr. TIE DOWN BOLT ON EACH END GREASE CONTAINER LF CF APPLIANCE PRESSURE REGULATOR WIRING BOX COVER BLOWER CAN BE SWIVELED 90_ JGD8345 (Shown) BURNER Left Rear (LR) Left Front (LF) Right Rear (RR) Right Front (RF) Center Rear (CR) Center Front (CF) BTU/hr 7,500 7,500 9,000 9,000 9,000 9,000 ORIFICE #66 #66 #63 #63 #63 #63 INCHES DIAMETER .0330 .0330 .0370 .0370 .0370 .0370 COLOR Zinc Zinc Blue Blue Blue Blue 6