Jenn-Air JJW6024HM Owners Manual - Page 18

OVEN CARE Maintenance Functions The Drain, Descale, and Steam Clean functions are under "Settings". Function Suggested Use Drain Use to manually drain the boiler. Descale Use to descale the boiler. Steam Clean Use to rinse the oven. Follow the instructions in the appropriate function section to use the special functions. Drain To ensure that no residual water is left behind, the Drain function can manually drain the boiler. Empty the water tank and return it to its compartment before using the Drain function. To Use the Drain Function: 1. Press Settings. 2. Select Drain function. If the temperature in the boiler is above 140°F (60°C), the oven will not start the Drain function. Once the temperature has dropped below 140°F (60°C), it will begin to drain automatically. 3. The display will show the status of the cycle. "Please remove and empty container" will appear at the end of the cycle. 4. Empty the water tank and return it to its compartment before closing the oven door. Press OK when done. Descale When oven descale is necessary, "Descale requested" will appear on the display. When this message appears, descale must be completed before another oven cycle can be run. Before beginning the descale function, be sure that you have enough descaling liquid available. Use a descaler that is suitable for coffee and espresso machines and kettles. NOTE: Once the descale cycle has begun, the descaling procedure must be completed. To Use the Descale Function: 1. Make sure the oven is empty. 2. Press Settings. 3. Select Descale function. The oven will prepare for descale. 4. In the water tank, mix 34 oz (1 L) of water with 8.5 oz (250 mL) of descaler and replace the water tank into its compartment. 5. Press OK. 6. Follow the on-screen instructions. Do not interrupt the cycle until it has finished. 7. The display will show a message ("Please remove and empty container") at the end of the cycle. 8. Empty the water tank and return it to its compartment before closing the oven door. Press OK when done. No residue should be present in the system. The oven is properly descaled and ready to use. NOTE: When oven descale is recommended, "Descale requested" will appear on the display. If this appears you can continue to use the oven without running descale but after roughly 10 hours of more usage, descaling will be required. Steam Clean IMPORTANT: Do not use oven cleaners or any other additives with the Steam Cleaning function. The Steam Cleaning function is used to soften hard soiled particles and make cleaning easier. Use the Steam Cleaning function as soon as possible after spills occur. The longer a spill sits and dries in the oven, the more difficult it may be to remove. IMPORTANT: Since the water in the oven bottom is hot, do not open the oven door during the Steam Cleaning function. Press CANCEL at any time to end the cycle. The display will return to the time of day. To Use the Steam Cleaning Function: 1. Remove wire shelf and trays from the oven cavity. 2. Close the oven door. 3. Select Settings. 4. Select the Steam Clean function. 5. Follow the on-screen instructions. 6. Press START to begin the cleaning cycle. Helpful Hints ■■ Once the Steam Cleaning function is complete, remove all remaining water and debris in the bottom of the oven with a sponge or cloth. ■■ Wipe any remaining moisture from the oven door interior and oven cavity interior sides. ■■ Use a soft brush or nylon scrubber to wipe the oven interior. This may help with more stubborn stains. ■■ If any soil remains, run a second Steam Cleaning cycle to help loosen debris for easier removal. ■■ Use the Steam Cleaning on small spills such as cheese or sauce from pizza or snacks, or drips from casseroles. ■■ Food spills containing sugar, proteins or starches may require vigorous scrubbing to remove most of the debris. 18