Jenn-Air JUCFP242HL Owners Manual 1 - Page 14

2. Max Cool The Max Cool feature assists with periods of heavy usage, full grocery loads or temporarily warm room temperatures. Max Cool will reset the temperature for the refrigerator drawer to 32°F (0°C) and -3°F (-19°C) for the freezer drawer for a 24-hour period.  Press MAX COOL to activate Max Cool feature. NOTE: The temperature display will remain at -3°F (-19°C) and the indicator light will remain On for a 24-hour period unless any of the following happens:  User adjusts any of the compartment temperatures  Cool Off Mode is entered (activated by user)  Sabbath Mode is entered (activated by user)  After 24 hours, the temperature will automatically return to the previous temperature set point and the indicator light will turn Off. NOTE: If the previous temperature set point was set to Soft Serve in the freezer drawer, the temperature will return to the recommended temperature (0°F/17°C) instead when Max Cool is complete. 3. Ice Maker and Water Filtration System (Refrigerator/Freezer Drawers only) Connect to potable water supply. IMPORTANT: After connecting the refrigerator to a water source or replacing the water filter, fill and discard three full containers of ice to prepare the water filter for use before using ice. TURNING THE ICE MAKER ON/OFF IMPORTANT: Use the Ice maker touch pad on the control panel to turn on or off the Ice maker. Do not adjust the wire arm located on the ice maker.  Press the ICEMAKER touch pad to turn on the ice maker. The indicator will illuminate when On.  Press the ICEMAKER touch pad to turn off the ice maker. REMEMBER:  Allow 24 hours to produce the first batch of ice.  The quality of your ice will only be as good as the quality of the water supplied to your ice maker.  Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.  Do not store anything in the ice storage bin. 4. Using Presets For your convenience, each drawer also has controls that are preset to recommended storage temperatures for specific products. Pressing any preset option will set the temperature to the recommended temperature for each category: Refrigerator Drawers  Produce: 39°F (3°C)  Assorted: 37° (2°C)  Beverage: 34°F (1°C)  Meat: 32°F (0°C) Freezer Drawer  Soft Serve: 6°F (-14°C) NOTE: Soft Serve is a temporary temperature setting that will only last for 4 hours and returns to the previous temperature set point when complete.  Assorted: 0°F (-17°C)  Spirits: -2°F (-18°C)  Deep Freeze: -8°F (-22°C) 5. Adjusting the Temperatures When the refrigerator drawers are turned On for the first time, a recommended temperature is set by default. The controls adjust the temperature of both compartments independently.  To adjust set point temperatures, press "+" (plus) or "-" (minus) until the desired temperature setting is reached. Model JUDFP242* NOTE: The set point for the double refrigerator drawers model is 37°F(2°C). The set point range for this model is 32°F to 42°F (0°C to 5°C) for both compartments. Model JUCFP242* NOTE: The set point for the refrigerator/freezer drawers model is 37°F (2°C) for the refrigerator drawer and 0°F (-17°C) for the freezer drawer. The set point range for the refrigerator/freezer drawers model is 32°F to 42°F (0°C to 5°C) for the refrigerator drawer and -8°F to 6°F (-22°C to -14°C) for the freezer drawer. NOTE: Wait at least 24 hours between adjustments for the product to acclimate. 6. Viewing Celsius/Fahrenheit Temperatures Press the F/C touch pad to toggle between displaying the temperature in degrees Fahrenheit and degrees Celsius. The corresponding indicator will illuminate. 14