Jensen JGS8750BDS Use and Care Guide - Page 10
Removal of Gas Appliance - model
UPC - 719881169330
View all Jensen JGS8750BDS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Electrical Connection Appliances which require electrical power are equipped with a three-prong grounding plug which must be plugged directliyntoa properlgyroundedthreehole120 voltelectricoaultlet. Always disconnect power to appliance before servicing. The three-prong grounding plug offers protection against shock hazards.DO NOT CUT OR REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD PLUG. If an ungrounded, two-hole or other type electrical outlet is encountered, it is the personal responsibility of the appliance owner to have the outlet replaced with a properly grounded three-hole electrical outlet. Storage [}rawer (select models) 3. Pull out to the second stop position. 4. Grasp sides and lift drawer up and out. To replace: 1. Fit the ends of the drawer glides into the rails in the range. 2. Lift up the front of the drawer and gently push in to the first stop position. 3. Lift drawer up again and push until drawer is closed. Removal of Gas Appliance Gas appliance connectors used to connect this appliance to the gas supply are not designed for continuous movement. Once installed,DO NOT repeatedly move this gas appliance for cleaning or to relocate. If this appliance has to be moved and/or removed for servicing, follow the procedure described in the installationinstructions.For information, contact JennAir Customer Service at 1-800-JENNAIR (1-800-536-6247). To prevent range from accidentally tipping, range must be secured to the floor by sliding rear leveling leg into the antitip bracket. The storage drawer can be removed to allow you to clean under the range. To remove: 1. Empty drawer and pull out to the first stop position. 2. Lift up the front of the drawer. 9