Jensen MPX6411 Instruction Manual - Page 14

MPX6411

10

XM

®

RADIO OPERATION

Listeners can subscribe to XM

®

Radio on the Web by visiting www.xmradio.com, or by

calling (800) 967-2346. Customers should have their Radio ID ready (see “Displaying the

Identification (ID) Code”). Customers can receive a limited number of free-to-air

channels without activation.

Accessing XM

®

Radio Mode

To switch to XM

®

Radio mode, press

MODE

(2) until “XM RADIO” appears on the display.

Displaying the Identification (ID) Code

Before you listen to XM

®

Radio, you must subscribe to the service using your radio’s

identification number. To display the radio ID, press the

DOWN TUNING

(|<<) button (11) to

access channel 000. The screen displays “RADIO ID” followed by an 8-figure ID number.

Selecting a Station

Press the

UP TUNING

(>>|) or

DOWN TUNING

(|<<) button (10 and 11) to change to another

station.

Preset Stations

Press

BAND

(19) to change between three XM

®

Radio bands. Each band stores up to six

preset stations. You can store and recall a total of 18 preset stations.

Store a Station

1.

Select a band (if needed), then select a station.

2.

Hold a preset button (12 – 17) for three seconds. The preset number appears in the

display.

Recall a Station

1.

Select a band (if needed).

2.

Press a preset button (12 – 17) to select the corresponding stored station.

Preset Scan

1.

Press

AS/PS

(21) for < 3 seconds. The unit pauses for 5 seconds at each preset station

for all three bands (XM-1, XM-2, and XM-3).

2.

Press

AS/PS

again to stop scanning when the desired station is reached.

Tuner Modes

Press

DISPLAY

(7) to change the tuner mode to the following options in the order listed.

•

Channel Name

•

Genre (News, Sports, Hits, Kids, etc.)

•

Artist name

•

Song Name

•

11 Bar Spectrum Indicator

•

PTM (Animated Message)

Display Information

If the selected channel name, artist, or title exceeds eight characters, the display information

will scroll twice upon selection.

Category Mode

To select stations in a specific category, perform the following steps.

1.

Press and hold the

BAND

button (19) until “Direct-T” appears.

2.

Press

BAND

again to display “CATEGORY”.

3.

Turn the rotary encoder to move through the available categories.

4.

Press the

AS/PS

button (21) to select the displayed category.

5.

Once a category is selected, press the

UP TUNING

(>>|) or

DOWN TUNING

(|<<) button

(10 and 11) to select stations in the current category.

To change the category while in category mode, press the

AS/PS

button. “CATEGORY” will

flash in the display, allowing you to use the 5 and 6 buttons to select a different category.

Direct Tuning Mode

To enter a station directly, perform the following steps.

1.

Press and hold the

BAND

button (19) until “Direct-T” appears.

2.

Turn the rotary encoder to display XM CH 0 _ _.

3.

Turn the rotary encoder again to select the first digit of the desired channel (0, 1, or 2).

4.

Press the

ENTER

button (rotary encoder) to enter the first number and move to the

second position.

5.

Turn the rotary encoder again to select the second digit of the desired channel (0 - 9).

6.

Press the

ENTER

button (rotary encoder) to enter the second number and move to the

third position.

NOTE: Use the UP TUNING (>>|) or DOWN TUNING (|<<) button (10 and 11) to move

between the first and third positions.

7.

Turn the rotary encoder again to select the third digit of the channel you want to tune to (0

- 9).

8.

Press the

ENTER

button (rotary encoder) to enter the third number and access the

channel.

NOTE: If the channel is unauthorized or invalid, “CH Unavail” appears on the LCD and

return to the input interface after 2 seconds.

Jensen MPX6411 Instruction Manual - Page 14

Accessing XM, Radio Mode, Displaying the Identification ID Code, Selecting a Station, Preset

Page 14 highlights