Jensen UPA424CS Owners Manual - Page 8
Specifications
View all Jensen UPA424CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
SPECIFICATIONS CEA Power Ratings UPA224/UPA424 UPA224 Power Output: 18 watts RMS X 2 channels into 4-ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference (Reference: 1 watt, 4-ohms) Dynamic Power: 44 watts, all channels driven into 4-ohms @ < 1% THD+N Frequency Response: 20Hz to 20kHz, -3dB (Reference: 1 watt) Dimensions: 230mm X 52mm X 130mm UPA424 Power Output: 18 watts RMS X 4 channels into 4-ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference (Reference: 1 watt, 4-ohms) Dynamic Power: 88 watts, all channels driven into 4-ohms @ < 1% THD+N Frequency Response: 20Hz to 20kHz, -3dB (Reference: 1 watt) Dimensions: 230mm X 52mm X 170mm General Specifications Channel Separation @ 1kHz:
UPA224/UPA424
8
SPECIFICATIONS
CEA Power Ratings
UPA224
Power Output
: 18 watts RMS X 2 channels
into 4-ohms @ < 1% THD+N
Signal to Noise Ratio
: 70dBA below reference
(Reference: 1 watt, 4-ohms)
Dynamic Power
: 44 watts, all channels driven
into 4-ohms @ < 1% THD+N
Frequency Response
: 20Hz to 20kHz, -3dB
(Reference: 1 watt)
Dimensions
: 230mm X 52mm X 130mm
Specifications subject to change without notice.
UPA424
Power Output
: 18 watts RMS X 4 channels
into 4-ohms @ < 1% THD+N
Signal to Noise Ratio
: 70dBA below reference
(Reference: 1 watt, 4-ohms)
Dynamic Power
: 88 watts, all channels driven
into 4-ohms @ < 1% THD+N
Frequency Response
: 20Hz to 20kHz, -3dB
(Reference: 1 watt)
Dimensions
: 230mm X 52mm X 170mm
General Specifications
Channel Separation @ 1kHz
: <60dB
(Reference: 1 watt, 4-ohms)
Input Sensitivity
: For full power output at
clipping (1% THD+N)
Minimum Sensitivity - 300mVRMS
Maximum Sensitivity - 8VRMS
Reference Supply Voltage for rated output
:
14.4VDC (+ 0.2V)
Power Supply
: 14.4VDC, (11 to 16VDC
allowable), negative ground