Kenmore 26082 Use and Care Guide - Page 6

USE AND CARE The vacuum cleaner creates suction that picks up dirt. Rapidly moving air carries the dirt to the dust bin through the air flow passages. The dust bin lets the air pass through, while it traps the dirt. For best cleaning results, keep the airflow passage open. Check the starred areas occasionally for clogs. Unplug from outlet before checking. _'_ _, _,,_7 _'>" )/ /7" // J, _// /_ _ ,f_ // //_ // 9//// // _'_// // WARNING PersonalInjury and ProductDamage Hazard! • DO NOT plug in if switch is in ON position. Personalinjury or product damagecould result. • Thecordmoves rapidlywhenrewinding. Keepchildrenawayandprovidea clearpathwhen rewindingthe cordto preventpersonalinjury. • DO NOT use outlets above counters. Damage to items in surrounding area could occur. 1. Pull out the power cord to the desired length. When you unwind the cord, you will see a yellow and a red mark. The red mark is at the very end of the cord, the yellow mark is 28 inches from the cord end. NOTE: To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. 2. Plug the polarized power cord into a 120 Volt outlet located near the floor. To rewind: Unplug the cleaner. Hold the plug while rewinding to prevent damage or injury from the moving cord. Press on the cord reel button to rewind the cord. 3. To start, press power switch. TO stop, press power Cord Reel Button switch again. _j_ Power Switch Knob _(_--_rr_ _ -6-