Kenmore 26823 Use and Care Guide - Page 9
Suggested, Sweeping, Pattern, Suction, Performance
![]() |
View all Kenmore 26823 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Suggested Sweeping Pattern For best cleaning action, the PowerMate ® Nozzle should be pushed straight away from you and pulled straight back. This pattern should be continued across the rug with stow, gliding motions. NOTE: Fast, jerky strokes do not provide complete cleaning. Carpeted stairs need to be vacuumed regularly. For best cleaning results, keep all airflow passages open and free of clogs. Check occasionally for clogs. See HOW YOUR VACUUMWORKS section. Unplug the vacuum cleaner from the electrical outlet before checking for clogs. Suction Control and Performance Indicator (inteliCLEAN Automatic Booster Sensor with LED Display) / '7 Located on the handle are 4 buttons which have the following uses: OFF - Turns OFF the vacuum cleaner when you are finished cleaning. CARPET ON/OFF -Turns the PowerMate '_ Nozzle ON and OFF. This is indicated on the performance indicator when the CARPET light is illuminated. POWER CONTROL H-M-L Turns on the vacuum cleaner and cycles the suction level through high to medium to low. This is shown on the performance indicator by a flashing bar and the words HIGH, MID, LOW, inteliCLEAN ON/OFF This activates the vacuum cleaner's dirt sensor. When dirt is detected, the vacuum increases the suction level automatically. When the dirt has been removed, the suction level decreases to LOW. UoSiwntghret e ° Nozzle 1.When using the PowerMat e® Nozzle, release the nozzle from its fixed position by pressing the left pedal located on the top of the nozzle. 2. To adjust the carpet height setting, press the right pedal. There are 4 adjustments levels: XLOW, LOW, MID, HIGH. 3. The headlight and agitator start automatically when the vacuum cleaner is turned on. To stop the agitator when vacuuming bare floors, press the CARPET ON/OFF button on the hose handle. 4. If an object stops the agitator and the PowerMate ® Nozzle shuts off, turn off the vacuum cleaner, unplug it from the outlet, clear the obstruction or clog, and press the red reset button. Plug in the vacuum cleaner, press the ON button and continue vacuuming. 5. To remove the PowerMate ® Nozzle from the telescopic wand, shut off the vacuum cleaner, step on the release pedal on the neck of the PowerMate ® Nozzle, and pull the telescopic wand out of the neck of the PowerMate ® Nozzle.
![](/manual_guide/products/kenmore-26823-use-care-guide-103105c/9.png)