Kenmore 33124 Owners Manual - Page 12

Installation Instructions Installation Checklist • Is the fuse or circuit breaker size correct as shown in the chart in the "Product Specifications" section? • Are the wires from the circuit breaker or fuse service to the water heater's junction box on the correct wire size (gauge) as shown in the chart in the "Product Specifications" section? • Is the new temperature-pressure relief valve properly installed, and piped to an adequate drain? See Temperature-Pressure Relief Valve" section. • Is the water heater completely filled with water? See "Filling the Water Heater" instructions in the "Installation Instructions" section. • Will a water leak dama.ge anything? See "Facts to Consider About the Location" section. • Are the cold and hot water lines connected to the water heater correctly? See "Water Piping" instructions in the "Installation Instrucuons section. • Is there adequate clearance for maintenance around the water heater? • Do you need to call your electric company to check your wiring? (cont'd) TEMPERATUREPRESSURE -- RELIEF VALVE - DISCHARGE PIPE (Do not tap or plug) 6"AIR GAP FLOOR DRAIN MODEL RATING PLATE 12