Kenmore 33124 Owners Manual - Page 5

Materials and Basic Tools Needed Materials Needed To simplify the installation Sears has available the installation parts shown below. You may or may not need all of these materials, depending on your type of installation. _f Electric Water Heater Installation Kit [1"WATER HEATER HEAT TRAPS HELP REDUCE HEAT LOSS DUE TO o THERMAL SYPHONING _b 20" DIAMETER DRAIN PAN FOR WATER HEATERS 18" IN DIAMETER AND UNDER ,r,, r WATER HEATER INSTALLA. TION KIT WITH FLEXIBLE CONNECTORS FOR 314" OR I/2" THREADED OR COPPER PLUMBING EXPANSION TANKS FOR THERMAL EXPANSION CONDITIONS AVAILABLE IN 2 GALLON AND $ GALLON CAPACITY THROUGH LOCAL SEARS SERVICE CENTERS 28" DIAMETER DRAIN PAN FOR WATER HEATERS 26" IN DIAMETER AND UNDER Basic Tools You may or may not need all of these tools, depending on ycour type of installation. These tools can be purchased at your local Sears store. • Pipe Wrench (2) • Screwdriver • 6 Foot Tape or Folding Rule • Garden Hose • Drill • Pipe Dope or Teflon Tape GARDEN HOSE 6 FOOT TAPE !i SLOT-HEAD SCREW DRIVER PHILLIPS SCREWDRIVER WRENCH (SQUPEIPEEZEDOPTEUBE) ROLL OF TEFLON TAPE (Use only on water connections) DRILL ADDITIONAL TOOLS NEEDED WHEN SWEAT SOLDERING •Tubing Cutters or Hacksaw •Propane Torch •Soft Solder •Solder Flux •Emery Cloth •Wire Brushes BRUSH 1/2" WIRE BRUSH _'_ ROLL OF LEAD FREE SOFT SOLDER PROPANE TORCH ROLL OF EMERY CLOTH SOLDER FLUX TUBING CUTTER