Kenmore 33176 Owners Manual - Page 3

manualndsafetymessages beforeinstallinogp, eratinogr servicinthgiswatehr eater. Failurteofollowinstructioannsd safetymessagceosuldresuilnt deathorseriouisnjury. Instructiomnanuaml usrtemain withwatehr eater. Water temperature over 125°F (52°0) can cause severe burns instantly resulting in severe injury or death. Children, the elderly, and the physically or mentally disabled are at highest riskfor scald injury. Feel water before bathing or showering. Temperature limiting valves are available. Read instruction manual for safe temperature setting. Fire or Explosion Hazard . Avoid all ignition sources if you smell gas. • Do not expose water heater control to excessive gas pressure. • Use only gas shown on rating plate. • Maintain required clearances to combustibles. • Keep ignition sources away from faucets after ', extended period of non-use. / Read instruction manual before installing, using or servicing water heater. Fire or Explosion Hazard o Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Fire Hazard For continued protection against riskof fire: ° Do not install water heater on carpeted floor. , Do not operate water heater if flood damaged. Explosion Hazard - Overheated water can cause water tankexplosion. o Properly sized temperature and pressure relief valve must be installed in opening provided. Breathing Hazard - Carbon Monoxide Gas Install vent system in accordance with codes. Do not operate water heater if flood damaged. High altitude orifice must be installed if a standard model is installed above 2,000 ft.(610 m) or a high altitude model is installed above 5,500 ft. (1,676m). Do not operate if soot buildup is present. . Do not obstruct water heater air intake with insulating jacket. Do not place chemical vapor emitting products near water heater. Gas and carbon monoxide detectors are available. Breathing carbon monoxide can cause brain damage or death. Always read and understand instruction manual. improper installation and use may result in property damage. • Do not operate water heater if flood damaged. • Inspect and replace anode. • Install in location with drainage. • Fill tank with water before operation. • Be alert for thermal expansion. Refer to instruction manual for installation and service.