Kenmore 4027 Use and Care Guide - Page 12

WARNING: To reduce the risk of fire, el_tric shock, or inju_ to _rsons, read and follow this entire manual, including the Important Safety Instructions, before operating this washer. CONTROL PANEL FEATURES ® () q) O POWER (ONJOFF) BUTTON Press to turn the washer ON. Press again to turn the washer OFF. NOTE: Pressing the POWER button during a cycie will cancel that cycle and any load settings will _ lost. The door will unlock after a brief pause unless the water level or tem_rature is too high. CYCLE MODIFIER BUTTONS Use these buttons to adjust the desired cycle options for the selected cycle The lights above the buttons show the current selection. See page 19 for a complete description. NOTE ; Not all settings are available on all cycie selections. See chart on page 14 for details. O CYCLE SELECTOR KNOB Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. These settings can adjusted using the cycle setting buttons anytime before starting the cycle. (See the cycle guide on page 14 for allowable settings. To protect your fabrics, not a]] settings are allowed in all cycles.) START/PAUSE BU_ON Press this button to start the selected cycle. if the washer is running, use this button to pause the cycle without losing the current settings. NOTE : if you do not press the START/PAUSE button within 4 minutes of selecting a cycle, the washer automatically turns off. O SPECIAL CYCLE AND OPTION BUTTONS These buttons are used to activate s_cial cycles or options. See page 20 for details. TIME AND STATUS DISPLAY The display shows the estimated time remaining, load size, cycle status, and door lock status. See page !8 for a complete description. DISPENSER Dispenser drawer. This drawer contains the compartments for detergent and additives. See pages 16 -17 for complete information 12