Kenmore 4027 Use and Care Guide - Page 20

CYCLE OPTION BUTTONS AUTO SOAK Your washing machine features several additional cycle options to customize cycles to meet your individual needs, O Turn on the washer and turn the cycle selector knob to _]ect the desired cycle. O Use the cycle modifier buttons to adjust the settings for that cycle. O Press the cycle option button(s) for the option(s) you would like to add. The button will light when that option is selected. If the selected option is not allowed for the Elected cycle, the chime will sound twice to informyou that it is not allowed. O Press the START/PAUSE button to start the cycle. The washer will start automatically after a brief delay for iiiii ii ii ilo!cikii!nigi!thieiid!oioiri,iii! ijjii!ii!!!!!ii i!i!!ili! NOTE: To protect your garments, not every option is available with every cycle. See the CYCLE GUIDE for iiiiiiiiiiiidiieiitaiiiilsii.ii!iiiii!i iiii!i!ili!ii!iiii iiiiiiiiiiiiiiiiDiiEiiiLiiAiiiYi, iSiiTiiiAiiRiiTii ili Onc4_you have selected the cycle and other settings, press this button to delay the start of the wash cycle, Each press of the button Delay Start increases the delay time by one hour, for up to 19 hours Once the desired delay time is set, press the START/PAUSE button to start the delay time. If the START/PAUSE button is not pressed within 4 minutes, the control will shut off and the settings will be lost. 2 nd RINSE _to Seek Use the AUTO SOAK option to presoak garments to help remove difficult spots or stains on fabrics. This option provides a 30 minute presoak prior to the start of the selected cycle. O Add detergent only to the Main wash compartment of the dispenser drawer. (See "Using the Dispenser" on pages 16-17,) O Select desired cycle. O Select cycle modifiers, O Press the START/PAUSE SPECIAL FUNCTIONS CONTROL LOCK Use this option to disable the controls, This feature allows you to prevent children from changing cycles or operating the Con_olLock machine. Once set, the CONTROL LOCK must be turned off before the controls can be used. On_ the washer has shut off, the power button will allow the machine to be turned on, but the ccntrols will still be locked. When the controls are locked, °CL" will be displayed alternately with the estimated time remaining. Press and hold the CONTROL LOCK button for 5 seconds to activate or deactivate the control& To lock the controls without running a cycle, turn the washer on then press and hold the CONTROL LOCK button for 5 seconds. The ccntrois will be locked, and the washer will power off after 4 minutes. 2 _ Rinse This option will add an extra rinse to the selected cycle. Use this option to help ensure the removal of detergent or bleach residue from fabric. STAIN TREAT Use this option for heavily soiled loads that need improved Main treatment. When STAIN TREAT is selected, the water StainTreat temperature for the selected cycle will begin as warm water to help prevent the setting of _rtain types of stains. Then as the cycle progresses, the water will be heated to higher temperatures to help remove stains that require treatment at higher temperatures. This option is designed for optimum stain removal NOTE: • If STAIN TREAT is selected with the SANITARY cycle, the cycle will begin with very hot water since that is default for that cycle and cannot be changed. CLEAN WASHER A buildup of detergent residue can occur in the wash tub over time and can lead to a mildewy or musty smell. The CLEAN CleonWo_r WASHER cycle is specially designed to remove this buildup using bleach or other cleaner designed specifically for cleaning front load washers. The CLEAN WASHER cycle should be run on_ a month, or more often under heavy use conditions or ifodor is present. O Turn on the washer and press the CLEAN WASHER button. Selecting any other cycle after CLEAN WASHER has been selected will cause the CLEAN WASHER cycle to be cancelled. O Fill the bleach dispenser to the MAX line with iiquid chlorine bleach*. Do not overfill the bleach dispenser. Overfilling will cause the bleach to be dispensed immediately. Press the START/PAUSE to start the cycle. After the cycle has ended, open the door and allow the drum interior to dry completely. NOTE: Do NOT use this cycle with clothes, and do NOT add detergent or fabric softener, * For powdered tub cleaners, add the cleaner to the main wash compartment of the dispenser drawer_ Place tabiet cleaners directly intothe tub Always follow the cleaner 2O manufacturers instructions and recommendations