Kenmore 4027 Use and Care Guide - Page 27

BEFORE, FOR SERVICE, Door will not unlock when cycle is stop_d, or paused, cycle, Musty or mildewy, - 2 sears

Page 27 highlights

BEFORE CALLING FOR SERVICE (cont.) Door will not unlock when cycle is stop_d or paused Check if,. Then.,, Interiortemperature of washer is too high, Water level in washer is too high, The washer door has a safety feature to prevent burns For example, if the washer is paused during the hot wash portion of a sanitary cycle, the interior temperature of the drum will be very hot, so the door will not unlock. This is normal. Allow the washer to coo] until the DOOR LOCK indicator turns off on the display. Allow the washer to complete the programmed cycle, or press the CANCELJDRA]Nbutton to drain the water, Wash cycle time is longer than usual Check if,,. amount of laundry,water pressure, water heating time, and I Tothheerwoapsehreartianugtocomnadtiit_io]lnys.adjusts the wash time for the Then,,, This is normal. The washer adjusts cycle time automatically to provide optimal resuBtsfor the selected cycle. The time remaining shown in the display is only an estimate. Actual time may vary. Musty or mildewy odor in washer Check if,,. Incorrector too much detergent has been used, Insideof tub not cleaned pro_r]y. Then,,, Use only HE (High-Efficiencyd) etergent in a_rdance with the manufacturer's instructions. Run the CLEAN WASHER cycle regularly. Be sure to wipe around and under the door seal frequently. See Care and Cleaning of the Interior in Care and Cleaning on page 21. Clean around door seal/glass to prevent odor or mildew: 1, Wipe dry the door seal/glass and the door opening area 2, Wipe around the inner drum/door seal and the lower door sea] 3. For di_cult-to-remove odors, use Affresh available at your local Sears store or online at www.partsdirect.com. Check if,,. Washer not unloaded promptly, Washer overloaded. Hot and cold water inlet hoses are reversed, Then,.. Always remove items from the washer as soon as the cycle is _mplete. The washer can be fully loadedbut the drum should not be tightly packed, and the door should close easily. Hot water rinse can set wrinkies in garments, Che_ the inlet hose _nnections,. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

BEFORE
CALLING
FOR SERVICE
(cont.)
Door will not unlock when cycle is stop_d
or paused
Check if,.
Then.,,
Interior
temperature of washer is too high,
The washer door has
a
safety feature to prevent burns
For example, if the
washer
is paused during the hot
wash
portion of
a sanitary cycle, the interior temperature of the drum will be very hot,
so the door will not unlock. This is normal. Allow the washer to coo]
until the DOOR LOCK indicator turns off on the display.
Water level in washer is too high,
Allow the washer to complete the programmed cycle, or press the
CANCELJDRA]Nbutton to drain the water,
Wash
cycle
time is longer than
usual
Check if,,.
Then,,,
I The washer automati_]ly adjusts the wash time for the
amount of
laundry,
water pressure, water heating time, and
other operating conditions.
This is normal.
The washer
adjusts cycle time automatically to
provide optimal resuBts
for the selected cycle. The time remaining
shown in the display is only an estimate. Actual time may vary.
Musty or mildewy
odor
in washer
Check if,,.
Then,,,
Incorrect
or too much detergent has been used,
Use only HE
(High-Efficiency)
detergent in
a_rdance
with the
manufacturer's instructions.
Inside
of tub not cleaned pro_r]y.
Run the CLEAN WASHER cycle regularly. Be sure to wipe around
and under the
door
seal frequently. See Care and Cleaning of the
Interior in Care and Cleaning on page 21.
Clean
around door
seal/glass to prevent odor or mildew:
1, Wipe dry the door seal/glass
and
the door opening area
2, Wipe around the inner drum/door seal
and
the lower door sea]
3. For di_cult-to-remove odors, use Affresh available at your
local
Sears store or online at www.partsdirect.com.
Check
if,,.
Then,..
Washer not unloaded promptly,
Always remove items from the washer as soon as the cycle
is
_mplete.
Washer overloaded.
The washer can be fully
loaded
but the drum should not be tightly
packed, and the
door
should close
easily.
Hot and cold water inlet hoses are reversed,
Hot water rinse can set wrinkies in garments, Che_ the inlet hose
_nnections,.
27