Kenmore 4123 Installation Instructions - Page 2

Overhead Cabinet Should Not Exceed a Maximum Depth of 13" (33 cm) 4- 30" (76.2 cm) Min. Clearance Between the Top of the Cooking Platform and the Bottom of an Unprotected Wood or Metal Cabinet _,_ 24" (61 cm) Min. when Bottom of Wood or Metal Cabinet is Protected by Not Less Than 1/8" Flame Retardant Millboard Covered With Not Less Than No. 28 MGS Sheet Steel, 0.015" (0.4 mm) Stainless Steel, 0.024" (0.6 mm) Aluminum or 0.020" (0.5 mm) Copper 18" (45.7 cm) G Distance Between "--,,L Edge of Cutout and Nearest 10" Combustible Surface ( 25.4 cm) Above Countertop 12" (30.5 cm) J Min. From Edge of Cooktop to Nearest Combustible Wall (Either Side of Unit). 2 1/2" (6.4 cm) Min. From Edge of Cutout to Front Edge of Countertop Approximate Location of Junction Box Letters on this figure refer to chart on front page except for J & K. It is not recommended to use drawer underneath cooktop. Empty space is needed for installation purpose. _To eliminate the risk of burns or fire by reaching over heated surfaces, cabinet storage space located above the cooktop should be avoided. If cabinet storage is provided, risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets. 30" CeramicGlass 36" CeramicGlass 71/2"(19.1cm) 71/2"(19.1cm) Figure 2 - COUNTERTOP CUTOUT OPENING 2 2" (5.1cm) 2" (5.1cm)