Kenmore 4123 Installation Instructions - Page 5
U.L.-Listed Conduit
View all Kenmore 4123 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
If cooktop is used in a new branch circuit installation (1996 NEC), mobile home, recreational vehicle, or where local codes DO NOT permit grounding through the neutral (white) wire: If your cooktop has a 3-wire cable (see figure 6): 1. Disconnect the power supply. 2. Separate the green (or bare copper) and white appliance cable wires. 3. Cap the white wire from the power supply cable if a 3-wire appliance cable is supplied. 4. In the circuit breaker, fuse box or junction box: connect appliance and power supply cable wires as shown in figure 6. If your cooktop has a 4 wire cable (see figure 7): 1. Disconnect the power supply. 2. Separate the green (or bare copper) and white appliance cable wires. 3. In the circuit breaker, fuse box or junction box: connect appliance and power supply cable wires as shown in figure 7. Cable from Power Supply Ground Wire _-'-m Red /-White ires] Cable from Power Supply Ground Wire Red Wires .White Wire Wires Box Ground Wire >......i....... (Bare or Green Wire a _ U.L.-Listed Conduit Connector (or CSA listed) Cable from appliance Figure 6 4-WIRE GROUNDED JUNCTION BOX (Bare or Green _