Kenmore 464324909 Use and Care Guide - Page 12

| Haic)ge. Lig LIGHT OPERATION iNSTRUCTiONS 1. 2. 3. 1. Make sure light switch on the control panel is in the "OFF" position. 2. Connect light plug to an extension cord, then put the extension cord plug into the outlet on the wall. 3. Turn the light switch to "ON". • Keep any electrical supply cord away from any heated surface. • Use the shortest length extension cord required. Do not connect 2 or more extension cords together. Extension cord, for out door use Bulb Replacement A Make sure light switch on the control panel is in the "OFF" position and adapter plug is disconnected from outlet. Release the screw securing the light socket. Take out the socket and remove the lens. Loosen the two screws which are locking the bulb. Reverse instructionsfrom step 3 through step 1 to re-install socket. Pull out the bulb and replace with a new bulb. c.uT,o. Takecarenot to touch the bulb with your barefingers. Touching bulb with your skincanleavea film on the bulb that causesit to burn out quickly. 12. 464222609 Continuedon nextpage