Kenmore 464324909 Use and Care Guide - Page 18

screw, washer, iberwasher, Pliers

Page 18 highlights

Insert front brace under control panel and between cart side panels. Secure using two l/4-20xllA '' screws, 7ram lock washers on each side. NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED AS ILLUSTRATED BELOW. 7rnm Lock washer Qty.4 1/4-20x11/2s"crew Qty.4 Remove the two screws and washers which were attached on right side of firebox front, shown A. Insert flange on right side shelf into side shelf brackets on side of firebox, shown B. Attach right side shelf front using the two screws and washers which were removed from right side of fire box, shown C. Attach rear of shelf using one 1/4"-20x1/2" screw, 7ram lock washer, fiber washer and 1/4" nut, shown DIE. l/4-20xl/2"Screw Qty.1 7mm lock washer Qty.1 O iberwasher Qty.1 _ /4" nut Qty.1 Pliersneeded 18,464222609 right

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Insert front brace under control panel and between cart side panels.
Secure using two l/4-20xllA '' screws, 7ram lock washers on each side.
NOTE: MAKE
SURE
THAT THE FRONT BRACE IS MOUNTED AS ILLUSTRATED BELOW.
7rnmLockwasher
Qty.4
1/4-20x11/2"
screw
Qty.4
Remove the two screws and washers which were attached on right side of firebox front, shown A.
Insert flange on right side shelf into side shelf brackets on side of firebox, shown B.
Attach right side shelf front using the two screws and washers which were removed from right side of fire box, shown C.
Attach rear of shelf using one 1/4"-20x1/2" screw, 7ram lock washer, fiber washer and 1/4" nut, shown DIE.
l/4-20xl/2"Screw
Qty.1
7mm lock
washer
Qty.1
O
iberwasher
Qty.1
_
/4"
nut
Qty.1
right
Pliers
needed
18,464222609