Kenmore 4751 Use and Care Guide - Page 5

INSTALLATION REQUIREMENTS Gather the required tools and parts before starting installation. The parts supplied are in the washer drum. Tools needed for connecting the water • Pliers (that open to 19/16" [39.5 mm Flashlight (optional) for installation Open end wrenches 14 mm and 13 mm Level Wood block Ruler or measuring tape inlet hoses Pedestal You have the option of purchasing pedestals of different heights separately for this washer. You may select a 10" (25.4 cm) or a 15.5" (39.4 cm) pedestal. The pedestal will add to the total height of the washer. Tools needed Parts supplied Optional pedestal C O To order, call your local Sears store. For further information, please call 1-800-4-MY-HOME ®(1-800-469-4663). Pedestal Height 10" (25.4 cm) 15.5" (39.4 cm) Approximate with washer height Color White White Model Number 46822 57822 _ i! i 46" (116.8 cm) 51.5" (130.8 cm) A. Drain hose form B. Inlet hose (2) C. Inlet hose washer (4) D. Transport bolt hole plug (4) E. Beaded strap Stack Kit Are you planning to stack your washer and dryer? To do so, you will need to purchase a Stack Kit. To order, call your local Sears store. Ask for the stack kit (Part Number 8572546). For further information, please call Alternate Parts Parts listed are available from your local Sears store or Sears Service Center. For further information, please call 1-800-4-MY-HOME ® (1-800-469-4663). Laundry tub or standpipe taller than 96" (2.4 m) Overhead sewer Sump pump system (if not already available) Standard 20 gal. (76 L), 30" (76.2 cm) tall drain tub or utility sink and sump pump (available from local plumbing suppliers) Siphon break, Part Number 285834; additional drain hose, Part Number 8318155; and connector kit, Part Number 285835 4 ft (1.2 m) drain hose extension kit, Part Number 285863 2 longer water fill hoses: 6 ft (1.8 m) Part Number 76314 10 ft (3.0 m) Part Number 350008 Floor drain Drain hose too short Water faucets beyond reach of fill hoses