Kenmore 6806 Use and Care Guide - Page 21
Dry Cycles
UPC - 883049146713
View all Kenmore 6806 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
• Drying temperature and dryness level are preset when you choose an Auto Dry Cycle. You can select a different dryness level, depending on your load, by pressing Dryness Level and choosing More, Normal or Less. NOTE: You cannot use the Time Adjust and you cannot choose a Temperature with the Auto Dry Cycles. • If you wish to adjust the cycle length of a Timed Cycle, press the Time Adjust (More Time or Less Time) arrows. Adjust the temperature of a Timed Cycle by pressing Temperature until the desired temperature is selected. NOTE: You cannot choose a dryness level with Timed Cycles. Follow the progress of your dryer with the drying Status indicator lights. STATUS Wet _i Dar_ Cool Down ClotUrDesry Wrinkle 6uald Che¢k til, t Screen(_ Wet The Wet light illuminates at the beginning of an Auto Cycle if a wet item is detected. • In an Auto Cycle, if a wet item is not detected after approximately 5 minutes, the dryer goes directly into Cool Down and the Cool Down and WRINKLE GUARD®indicators illuminate, if selected. • In a Timed Cycle, wet items are not detected. The dryer will continue to run for the length of time selected, and the Wet light will illuminate. The damp light will not illuminate. Damp The Damp light illuminates in an Auto Dry Cycle when the laundry is approximately 80% dry. Damp Dry Signal beeps, if selected. See "Options." Cool Down The Cool Down light illuminates during the cool down part of the cycle. Laundry cools for ease in handling. Clothes Dry The Clothes Dry light illuminates when the drying cycle is finished. This indicator stays on during WRINKLE GUARD _. WRINKLE GUARD ® The WRINKLE GUARD _ light illuminates when this option is selected. This indicator stays on during WRINKLE GUARD _. Check Lint Screen The Check Lint Screen light reminds you to check the lint screen. The light illuminates when the user selects a cycle. It goes out when the door is opened, Start is pressed, or after 5 minutes elapses. Indicator lights Other indicator lights show Cycle, Options, Modifiers and Cycle Signal settings selected. The display shows the estimated or actual time remaining. Select the drying cycle that matches the type of load you are drying. See Auto or Timed Preset Cycle Settings charts. AUTO DRY CYCLES Cotton / Towels Heavy Duty Normal Bulky / Bedding Timed Dry Express Dry TIMED CYCLES Touch Up Ultra Delicate Refresh STEAMCARE Auto Dry Cycles F Auto Dry Cycles allow you to match the cycle to the load you are drying. See the following Auto Preset Cycle Settings chart. Each cycle dries certain fabrics at the recommended temperature. A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying. Heavy Duty Use this cycle to get high heat for heavyweight mixed loads, cottons and jeans. Cotton/Towels Use this cycle to get high heat for drying heavy fabrics such as towels, sheets or cottons. Normal Use this cycle to get medium heat for drying casual business clothes, permanent press blends or work clothes. Bulky/Bedding Use this cycle to get medium heat for drying large items that require very long drying times such as jackets, comforters and cotton or polyester fiber filled pillows. Rearrange the load when the Damp Dry signal sounds. This step will aid in the drying process. Ultra Delicate Use this cycle to get extra-low heat to gently dry items such as washable knit fabrics, blouses or lingerie. 21