Kenmore 9745 Use and Care Manual - Page 38

the Oven, Cleaning, of Stainless, Steel, models

Get Kenmore 9745 - 30 in. Electric Range PDF manuals and user guides View all Kenmore 9745 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

General Care & Cleaning • Changing the Oven Light Oven Light Wire Holder Changing the Oven Light The oven light automatically turns ON when the door is opened. The oven light may also be manually operated by pressing the _ pad. The oven light bulb is located at the rear of the oven and is covered with a glass shield held by a wire holder. The glass shield must be in place whenever the oven is in use. To replace the oven light bulb: 1. Turn electrical power off at the main source or unplug the range. 2. Press wire holder to one side to release the glass shield. 3. Replace bulb with a new 40 watt appliance bulb. 4. Replace glass shield over bulb and snap wire holder into place. 5. Turn power back on again at the main source (or plug the range back in). 6. The clock will then need to be reset. To reset, see Setting the Clock and Minute Timer in this Use & Care Guide. Be sure the range is unplugged and all parts are COOL before replacing oven light. Wear a leather-faced glove for protection against possible broken glass. Care and Cleaning of Stainless Steel (some models) Some models are equipped with stainless steel exterior parts. Special care and cleaning are required for maintaining the appearance of stainless parts. Refer to the Care & Cleaning Table for detailed cleaning instructions. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
General Care & Cleaning
•
Changing the Oven Light
Oven
Light
Wire
Holder
Changing
the Oven
Light
The oven light automatically
turns ON when the door is opened. The oven light
may also be manually operated
by pressing the _
pad.
The oven light bulb is located at the rear of the oven and is covered with a glass
shield held by a wire holder. The glass shield must be in place whenever
the
oven is in use.
To replace
the
oven
light
bulb:
1.
Turn electrical
power off at the main source or unplug the range.
2.
Press wire holder to one side to release the glass shield.
3.
Replace
bulb with a new 40 watt appliance
bulb.
4.
Replace glass shield over bulb and snap wire holder into place.
5.
Turn power back on again at the main source (or plug the range back in).
6.
The clock will then need to be reset. To reset, see Setting
the Clock
and
Minute
Timer
in this Use & Care Guide.
Be sure the range is unplugged
and all parts are COOL before replacing
oven light. Wear a leather-faced
glove for protection against possible broken glass.
Care
and
Cleaning
of Stainless
Steel
(some
models)
Some models are equipped
with stainless
steel exterior parts. Special care and cleaning are required
for maintaining
the
appearance
of stainless
parts. Refer to the Care & Cleaning
Table for detailed cleaning instructions.
38