Kenmore AC2044-1 Operation Manual - Page 10

Remove the pre-filter See Cleaning - reset

Get Kenmore AC2044-1 - Electrostatic Air Cleaner PDF manuals and user guides View all Kenmore AC2044-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

MAINTENANCE 7. Plug the air cleaner back into a properly grounded 3-prong outlet. 8. Press the power On button. 9. Press the Check Preofilter button to reset it. CLEANING THE CELL (See Fig. 3) When the Check Cell light is flashing, it is time to clean the cell. 1. Turn Off the air cleaner by pressing the Power Button. Then unplug the unit from the electrical outlet. DO NOT touch unit for two minutes after turning OFF and -i unApUluTgIgOinNg:. To avoid harmless static shock that may occur, 2. Remove the pre-filter ( See Cleaning the Pre- Filter on page 9 ) NOTE: When you clean the cell, it is also a good time to clean the pre-filter. 3. Swing out the two handles on either side of the cell. 4. Firmly hold these handles and lift the cell up and out of the air cleaner. IMPORTANT: Be extremely careful and DO NOTTOUCH the fine ionizing wires and collection plates on the cell. The cell can be washed either of 2 ways: in a tub of water or in a dishwasher that is large enough. WARNING: Some edges of the cell are sharp, so handle it with extreme care. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
MAINTENANCE
7. Plug the air cleaner back into a properly grounded 3-prong
outlet.
8. Press the power On button.
9. Press the Check
Preofilter button to reset it.
CLEANING
THE
CELL (See Fig. 3)
When the
Check
Cell
light is flashing,
it is time to clean the cell.
1. Turn Off the air cleaner by pressing the Power Button.
Then unplug the unit from the electrical
outlet.
-i
AUTION:
To avoid harmless
static shock that may occur,
DO NOT touch unit for two minutes after turning OFF and
unplugging.
2. Remove the pre-filter ( See Cleaning
the Pre- Filter on page 9 )
NOTE: When you clean the cell, it is also a good time to clean the pre-filter.
3. Swing out the two handles on either side of the cell.
4. Firmly hold these handles and lift the cell up and out of the air cleaner.
IMPORTANT:
Be extremely
careful and DO NOTTOUCH
the fine ionizing
wires and collection plates on the cell.
The
cell
can be washed
either
of
2 ways:
in a tub of water
or in a
dishwasher
that
is large enough.
WARNING:
Some edges of the cell are sharp, so handle it
with extreme care.
10