Kenwood DDX318 Installation Manual - Page 4

Connecting Wires to Terminals Bluetooth Microphone (Accessory 7) DDX418/DDX4048BT only Purple/White (Reverse sensor wire) Antenna Cord Light Green Connect to vehicle's reverse lamp harness when using the optional rear view camera. Extension cable (Accessory 2) (Parking sensor wire) FM/AM antenna input Accessory 1 FUSE ( 10A ) For best safety, be sure to connect the parking sensor. ⁄ Connect to the vehicle's parking brake detection switch harness. White + / White/black - : To front speaker (left) Gray + / Gray/black - : To front speaker (right) Green + / Green/black - : To rear speaker (left) Purple + / Purple/black - : To rear speaker (right) If no connections are made, do not let the cable come out from the tab. Blue (Antenna control wire) Blue/White (Power control wire) Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. When using the optional power amplifier, connect to its power control terminal. Brown (Mute control wire) Light blue/Yellow (Steering remote control wire) To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.) To use the steering wheel remote control feature, you need to an exclusive remote adapter (not supplied) matches your car is required. Orange/White (Dimmer control wire) To car light control switch Red (Ignition wire) ACC Ignition key switch Yellow (Battery wire) Black (Ground wire) - (To car chassis) 4 DDX418/DDX4048BT/DDX318/DDX3048 Car fuse box Car fuse box (Main fuse) Battery