Kenwood DDX318 Installation Manual - Page 6

Installation/Removing the Unit Installing the Unit Installing the Escutcheon 1 Attach accessory 5 to the unit. Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Installation on Toyota, Nissan or Mitsubishi Car using Brackets Accessory 3 (M5x6mm) or Accessory 4 (M5x7mm) Car Bracket Accessory 5 Removing the Escutcheon 1 Engage the catch pins on the removal tool 6 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Accessory 6 Catch Lock Accessory 3 (M5x6mm) or Accessory 4 (M5x7mm) ⁄ • The frame can be removed from the top side in the same manner. 2 When the lower level is removed, remove the upper two locations. 6 DDX418/DDX4048BT/DDX318/DDX3048