Kenwood DDX8017 Instruction Manual - Page 80
Security Code Setup - code for
UPC - 019048162656
View all Kenwood DDX8017 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Before Use Security Code Setup You can set a security code to protect your receiver system against theft. • When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note, the Security Code can be set as the 4 digit number of your choice. 1 Display the Security Code Setup screen Security 2 Start the security code registration Set PassWord 1 1 2 4 5 7 8 0 3 6 9 2 Clear 3 Cancel 4 Enter If Security is not shown, touch Prev. or Next to display it. MENU 3 Security code set 2 SI 1 On Set 4 Off 5 1 Enters the numbers to make your security code. 2 Clears your entry. 3 Cancels the registration and returns to the Security Code Setup screen. 4 Registers your security code. 3 Enter a security code 0 - 9 Security 1 Returns to the Control screen of the previous source. 2 Calls the Sound Effects Menu. (page 88) 3 Calls the Setup Menu. 4 Allows you to start security code registration. 5 Turns the SI function On or Off. If turned "On", the burglar alarm lamp flashes when the vehicle ignition is off. ( On) Input a four-digit number. 4 Register your security code Enter 5 Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation. • If you have already completed the code registration, cannot touch Set . 80 | English • If you enter a different security code, the screen returns to Step 3 (for the first code entry). 6 Register the security code again Enter Now, your security code is registered. If you press the Reset button or if you disconnect your receiver from the battery after the code registration, you need to enter the registered security code. See below for details.