Kenwood DMX110BT Operation Manual - Page 17
Controlling Audio, Controlling General Audio, Equalizer Control, Subwoofer settings
View all Kenwood DMX110BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Controlling Audio Controlling General Audio 1 Press the button. 2 Touch [Setup]. 3 Touch [Audio]. 4 Touch [Sound Effect]. 5 Touch [ ]. 6 Set each item as follows. Equalizer Control 1 Press the button. 2 Touch [Setup]. 3 Touch [Audio]. 4 Touch [Sound Effect]. 5 Set each item as follows. 1 Fader Adjust the front and rear volume balance. [ ] [ ] 12 (front) to -12 (rear) Balance Adjust the left and right volume balance. [ ] [ ] 12 (right) to -12 (left) [Reset] To clear the adjustment. ÑÑLoudness 1 Press the button. 2 Touch [Setup]. 3 Touch [Audio]. 4 Touch [Loudness]. Sets the amounts of boost of low and high tones. "ON", "OFF" (Default) 2 3 1 You can select frequency bar and adjust its level. (-7 to +7) • The adjustments are stored and "User" is activated. 2 To recall the preset equalizer curve. 3 The "User" preset and the current EQ curve returns to flat. Subwoofer settings 1 Press the button. 2 Touch [Setup]. 3 Touch [Audio]. 4 Touch [Subwoofer]. 5 Set each item as follows. Frequency Low Pass Filter adjustment. / [80Hz], [120Hz], [OFF]: Turns off the subwoofer [160Hz], [OFF] output. (Default OFF) Volume [-], [+] Adjusts the subwoofer level. 0 to 12 (Default 6) English | 17