Kenwood DNN770HD User Manual - Page 46

Return to the Top page HD Radio 6 Preset list Displays the list of preset stations or channels and the information. 7 Sub function menu The following functions can be performed by using keys in this area. • Switches the band: Touch [AM] or [FM]. • Tunes in a station: Touch [E] [F]. The method of frequency switching can be changed. See Seek mode. • Selects a channel: Touch [CH S] or [CH R]. • Stores the information about the song being received: Touch [ ]. See Bookmark (P.95). • Tunes in by entering direct number: Touch [ ] and enter the desired number. For details, see Direct search (P.92). 8 Sub function/ List switching key Touch to display "Sub function menu" (7 in this table). Touch and hold to switch between the preset list and the information list. In HD Radio tuner mode, tuned program information will be displayed. ÑÑMulti function menu The functions of each key are as follows. [P1] - [P6] Select the preset station. Touch for 2 seconds to store the current station into the preset memory. [ ] Select search method from preset station selection, channel selection or bookmark selection. For details on search operation, see Selecting Operation (P.91), Bookmark (P.95). [TI] Sets the traffic information mode on. For details, see Traffic Information (P.93). [SEEK] Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL]. • AUTO1: Tunes in a station with good reception automatically. • AUTO2: Tunes in stations in memory one after another. • MANUAL: Switches to the next frequency manually. [AME] Selects the auto memory mode. For details, see Auto memory (P.91). [RCV] Switches the receive mode in the following sequence; [AUTO], [DIGITAL], [ANALOG]. For details, see Receive Mode (P.94). [PTY] Searches a program by setting program type. For details, see Search by program type (P.92). 90 Memory Operation ÑÑAuto memory You can automatically store stations with good reception to memory. NOTE • Auto memory terminates when 6 stations are stored or when all stations are tuned in. • Auto memory ends automatically if you do not operate within 10 seconds. 1 Touch [ ]. Sub function menu appears. 2 Touch desired band key. Return to the Top page HD Radio Selecting Operation ÑÑPreset select You can list and select memorized station or channel. Selecting from the multi function menu 1 Touch the desired number from P1 to P6. The navigation system will tune to the selected station or channel. Selecting from the preset list 1 Touch illustrated area. 3 Touch [ ] in the control screen. The multi function menu appears. 4 Touch [AME] in the multi function menu. 5 Touch [A] or [B] in the sub function menu. Auto memory starts. ÑÑManual memory You can store the current receiving station or channel in memory. 1 Select a station or channel you wish to store in memory. 2 Touch [P#] (#:1-6) in which you want to store the station or channel for 2 seconds until a beep sounds. List Control screen appears. 2 Touch and hold [ ]. Preset list appears. 3 Select a station or channel from the list. NOTE • Touching [ ] and then [Preset List] displays the preset channel list. You can also select your desired channel from the list. 91