Kenwood DPX-MP4030 User Manual - Page 5

About CDs Handling CDs • Don't touch the recording surface of the CD. CD cleaning Clean from the center of the disc and move outward. About Cassette tape Cleaning the tape head When there's noise or the sound quality is bad during tape play the tape head maybe dirty, clean the tape head. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don't stick tape etc. on the CD. Also, don't use a CD with tape stuck on it. Removing CDs When removing CDs from this unit pull them out horizontally. CDs that can't be used • CDs that aren't round can't be used. About Cassette tape • If the tape is slack tighten it. • If the cassette tape label is peeling off glue it on again. • Don't use deformed cassette tape. • Don't place cassette tape on the dashboard etc. where the temperature is high. • Don't use cassette tape that's 100 minutes long or longer. When using a new CD If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc. Burrs Burrs • CDs with coloring on the recording surface or that are dirty can't be used. • This unit can only play the CDs with . It may not correctly play disks which do not have the mark. • A CD-R or CD-RW that hasn't been finalized can't be played. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CD-RW recorder instruction manual.) CD accessories Don't use disc type accessories. CD storage • Don't place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high. • Store CDs in their cases. -5-