Kenwood DPX505BT Instruction Manual - Page 24
Pair and connect a Bluetooth device for the first time, Auto Pairing, Bluetooth - Mobile phone,
View all Kenwood DPX505BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Bluetooth® Pair and connect a Bluetooth device for the first time 1 Press B SRC to turn on the unit. 2 Search and select the name of your receiver ("DPX505BT") on the Bluetooth device. "PAIRING" "PASS XXXXXX" "Device name" "PRESS" "VOLUME KNOB" appears on the display. • For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately after searching. 3 Press the volume knob to start pairing. "PAIRING OK" appears when pairing is completed. Once pairing is completed, Bluetooth connection is established automatically. • " " and/or " " indicator on the display window lights up. • Depending on the settings made for [BATT/SIGNAL] (page 20), the strength of the battery and signal of the connected device are shown on the supplementary display (page 34). Auto Pairing When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated if [AUTO PAIRING] is set to [ON]. (Page 22) Press the volume knob to pair once you have confirmed the device name. Bluetooth - Mobile phone • This unit supports Secure Simple Pairing (SSP). • Up to five devices can be registered (paired) in total. • Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device, see [DEVICE DELETE] on page 21. • A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. To connect or disconnect the registered device, see [PHONE SELECT] or [AUDIO SELECT] in [BT MODE]. (Page 21) However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. (Page 22, 23) • Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually. • Refer to the instruction manual of the Bluetooth device for more information. Receive a call When there is an incoming call: • [KEY 1] zone and [KEY 2] zone illuminate in green color and flash. • The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. (Page 20) During a call: • [LCD DISPLAY] zone illuminates according to the settings made for [COLOR SELECT] (page 30) while [KEY 1] zone and [KEY 2] zone illuminate in green color. • If you turn off the unit, Bluetooth is disconnected. 18 ENGLISH