Kenwood DPX505BT Instruction Manual - Page 26
Make the setting for receiving a call, Make a call
View all Kenwood DPX505BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Bluetooth® Make the setting for receiving a call 1 Press to enter Bluetooth mode. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated. 4 Press and hold to exit. To return to the previous setting item, press . Default: [XX] [SETTINGS] [AUTO ANSWER] [1] to [30]: The unit answers incoming call automatically in the selected time (in seconds). ; [OFF]: Cancels. [BATT/SIGNAL]* [AUTO]: Shows the strength of the battery and signal on the supplementary display (page 34) when the unit detects a Bluetooth device and the Bluetooth device is connected. ; [OFF]: Cancels. * Functionality depends on the type of the phone used. Make a call You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. 1 Press to enter Bluetooth mode. "(First device name)" appears. • If two Bluetooth phones are connected, press again to switch to the other phone. "(Second device name)" appears. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press and hold to exit. To return to the previous setting item, press . 20 ENGLISH [CALL HISTORY] [PHONE BOOK] [NUMBER DIAL] (Applicable only if the phone supports PBAP.) 1 Press the volume knob to select a name or a phone number. • "INCOMING," "OUTGOING" or "MISSED" is shown on the lower part of the display to indicate the previous call status. • Press DISP to change the display category (NUMBER or NAME). • "NO DATA" appears if there is no recorded call history or call number. 2 Press the volume knob to call. (Applicable only if the phone supports PBAP.) 1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains many contacts). The first menu (ABCDEFGHIJK) appears. • To go to the other menu (LMNOPQRSTUV or WXYZ1 ), press 1 / 2 . • To select the desired first letter, turn the volume knob or press S / T, then press the knob. Select "1" to search with numbers and select " " to search with symbols. 2 Turn the volume knob to select a name, then press the knob. 3 Turn the volume knob to select a phone number, then press the knob to call. • For using phonebook with this unit, make sure to allow access to or transfer from your smartphone. Depending on the connected phone, the process may be different. • Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL • This unit can display only non-accent letters. (Accent letters such as "Ú" are shown as "U".) 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +). 2 Press S / T to move the entry position. Repeat step 1 and step 2 until you finish entering the phone number. 3 Press the volume knob to call. (or using the remote control) 1 Press the number buttons (0 to 9) to enter the phone number. 2 Press to call.