Kenwood KCA-S210A User Manual - Page 3

˙ If you want to connect a stack CD changer Centre unit Connection cable3 To the external units AV IN Switching unit1 (Rear side) SWITCH SWITCH AUX IN PROTOCOL AUX O N OFF ON TO TO TO H/U CHANGER 1 CHANGER 2 TO TO CONTROLLER H/U TO CHANGER 1 TO CHANGER 2 Switching unit1 (Front side) Disc changer Connection cable (supplied with the Disc changer) Extension cable (CA-C2E:Optional) Disc player Stack CD changer Connection cable (supplied with the stack CD changer) 2CAUTION • Connect it to a centre unit belonging to Group C or Group D. • Connect the stack CD changer to the terminal labelled TO CHANGER 2. • The KDC-C810 cannot be connected. • Up to two disc changers can be connected. • The O-N switch on the disc changer and the disc player should be set to "N". If you set it to "O", the equipment will not function correctly. • The total length of the cable between the units should not be more than 13m. Centre unit KCA-S210A Stack CD Changer Disc Player Not more than 13m • If the voltage is low and the internal temperature of the switching unit is low, switching may fail to work properly in some cases. • The AUX switch on the stack CD changer should be switched "OFF" before using the equipment. The AUX terminal on the KCA-S210A switching unit is the one that should be used. English-3