Kenwood KCA-S210A User Manual - Page 5
Identifying the type of centre unit you intend to connect, Setting the PROTOCOL switch, Group
View all Kenwood KCA-S210A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
SPWRIOTOTCOHCOLN S OAFFUX ON Identifying the type of centre unit you intend to connect The setting of the PROTOCOL switch and the operation used to switch to AUX sound will differ depending on the type of centre unit (cassette receiver, CD receiver, and so on) you are going to connect. Find out which of the following groups your centre unit belongs to, then consult the relevant section of this manual. ˙ Group A This group covers centre units with disc changer control, where the source selection does not allow you to switch the disc changer between 1 and 2. ˙ Group B This group covers centre units with disc changer control, where the source selection allows you to switch between 1 and 2, where the manual instructs you to set the O-N switch on the disc changer to "O", or where the O-N switch operation is not covered. ˙ Group C This group covers centre units with disc changer control, where the source selection allows you to switch between 1 and 2, where the manual instructs you to set the O-N switch on the disc changer to "N". ˙ Group D This group covers units released on to the market in or after 1999, where the manual covers AUX mode under source selection. Setting the PROTOCOL switch You will need to set the PROTOCOL switch according to the centre unit you wish to connect. 2CAUTION Turn the centre unit power off before operating the PROTOCOL switch. ˙ If the unit you are connecting belongs to Group A or Group B Set the PROTOCOL switch to the "O" position. 2CAUTION If you move the PROTOCOL switch to the "N" position, the switching unit will become inoperable. (If the disc changer you have connected has an O-N switch, set it to the "O" position also.) ˙ If the unit you are connecting belongs to Group C or Group D Set the PROTOCOL switch to the "N" position. 2CAUTION • If you move the PROTOCOL switch to the "O" position, then even if you have connected a disc changer supporting CD text, the CD text and the disc name (DNPS) will fail to be displayed on the centre unit. (If the connected disc changer has an O-N switch, set it to the "N" position also.) • If the disc changer you are connecting does not have an ON switch, you will not be able to use the disc name setting (DNPS) function. English-5 SPWRIOTOTCOHCOLSNWIOAFFUX ON