Kenwood KDC-248U Instruction Manual - Page 13

Function settings ENGLISH 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [AUDIO CTRL] or [SETTINGS], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. See table below for selection. Repeat step 3 until the desired item is selected/activated. Press to return to the previous item. 4 Hold to finish the procedure. [AUDIO CTRL] : While listening to any source except in STANDBY state... Item Selectable setting (Preset: *) SUB-W LEVEL -15 - +15 (Preset: 0): Adjusts the subwoofer output level. BASS BOOST B.BOOST LV1*/ B.BOOST LV2: Selects your preferred bass boost level. ; OFF: Cancels. SYSTEM Q NATURAL*/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ GAME: Selects a preset sound mode suitable to the music genre. (Selects [USER] to use the customized bass, middle, and treble settings.) BASS LEVEL -8 - +8 (Preset: 0): Source tone memory: Adjusts the level to memorize in each source. (Before making an MID LEVEL adjustment, select the source you want to adjust.) TRE LEVEL BALANCE L15 - R15 (Preset: 0): Adjusts the left and right speaker output balance. FADER R15 - F15 (Preset: 0): Adjusts the rear and front speaker output balance. SUB-W SET ON*: Turns on the subwoofer output. ; OFF: Cancels. DETAIL SET LPF SUB-W: THROUGH*: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Frequencies higher than 85 Hz/ 120 Hz/ 160 Hz are cut off. SUB-W PHASE: REV (180°)/ NORM (0°)*: Selects the phase angle of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [LPF SUB-W].) SUPREME SET: ON*: Creates realistic sound by interpolating the high-frequency components that are lost in MP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playback an MP3/WMA disc or a USB device, except iPod.) VOL OFFSET: -8 - +8 (for AUX) ; -8 - 0 (for other sources): Presets the volume adjustment level of (Preset: 0) each source. The volume level will automatically increase or decrease when you change the source. (Before making an adjustment, select the source you want to adjust.) [SUB-W LEVEL/ SUB-W SET/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SWITCH PRE] is set to [SUB-W]. (page 7) [SUB-W LEVEL/ LPF SUB-W/ SUB-W PHASE] is selectable only if [SUB-W SET] is set to [ON]. [SETTINGS] Item AUX NAME CLOCK DISPLAY Selectable setting (Preset: *) AUX*/ DVD/ PORTABLE/ GAME/ VIDEO/ TV: Selects the desired name for the connected component. (Selectable only if "AUX" is selected as the source.) CLOCK ADJ: (For details, see page 6.) DIMMER SET: ON: Dims the display illumination. ; OFF*: Cancels. TEXT SCROLL: AUTO*/ ONCE: Selects to scroll the display information automatically, or scroll only once. ; OFF: Cancels. 13