Kenwood KDC-248U Instruction Manual - Page 7
Listening to the radio - subwoofer
UPC - 019048191786
View all Kenwood KDC-248U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ENGLISH Item Selectable setting (Preset: *) SWITCH PRE REAR*/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear of the unit (through an external amplifier). SP SELECT OFF*/ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance. F/W UP xx.xx YES: Starts upgrading the firmware. ; NO*: Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/ Listening to the radio Hold for about 2 seconds to memorize the current station. Press briefly to recall memorized station. 1 Press SRC to select "TUNER." 2 Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ AM). 3 Press 4 / ¢ to search for a station. Adjust [SETTINGS] mode settings While listening to the radio... 1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm. See table below for selection. 4 Hold to finish the procedure. Item Selectable setting (Preset: *) SEEK MODE Selects the tuning mode for 4 / ¢ buttons. AUTO1*: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ; MANUAL: Manually search for a station. AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO*: Cancels (automatic memorizing is not activated). (Selectable only if [NORM] is selected for [PRESET TYPE].) (page 6) MONO SET ON: Improve the FM reception (but the stereo effect may be lost). ; OFF*: Cancels (stereo effect resumes). Using the remote controller (RC-405) FM+ / AM- : Selects band. 4 / ¢ (+) : Selects station. 1 - 6 : Selects preset station. 7