Kenwood KDC-258U User Manual - Page 10
Audio Settings - wiring
View all Kenwood KDC-258U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
AUDIO SETTINGS While listening to any source... 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [AUDIO CONTROL], then press the knob. 3 Turn the volume knob to make a selection (see the following table), then press the knob. Repeat step 3 until the desired item is selected or activated. 4 Press and hold to exit. (or using RC-406) 1 Press AUD to enter [AUDIO CONTROL]. 2 Press / to make a selection, then press ENT . To return to the previous setting item or hierarchy, press . Default: XX SUB-W LEVEL -15 to +15 (0): Adjusts the subwoofer output level. BASS LEVEL MID LEVEL TRE LEVEL -8 to +8 (+6): -8 to +8 (+5): -8 to +8 (0): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.) PRESET EQ DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/ NATURAL/ USER: Selects a preset equalizer suitable to the music genre. (Select [USER] to use the customized bass, middle, and treble settings.) [DRIVE EQ] is a preset equalizer that reduces noise from the road. BASS BOOST LV1/ LV2/ LV3: Selects your preferred bass boost level. ; OFF: Cancels. LOUDNESS LV1/ LV2: Selects your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level. ; OFF: Cancels. SUBWOOFER SET ON: Turns on the subwoofer output. ; OFF: Cancels. LPF SUBWOOFER THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ 160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are sent to the subwoofer. SUB-W PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [LPF SUBWOOFER].) FADER R15 to F15 (0): Adjusts the rear and front speaker output balance. BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance. VOLUME OFFSET -8 to +8 (for AUX) ; -8 to 0 (for other sources): Presets the volume (Default: 0) adjustment level of each source. (Before adjustment, select the source you want to adjust.) SOUND RECNSTR ON: Creates realistic sound by compensating the high-frequency (Sound components and restoring the rise-time of the waveform that are lost reconstruction) in audio data compression. ; OFF: Cancels. • [SUB-W LEVEL]/ [SUBWOOFER SET]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if [SWITCH PREOUT] is set to [SUB-W]. ( 4) • [SUB-W LEVEL]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if [SUBWOOFER SET] is set to [ON]. Muting upon the reception of a phone call Connect the MUTE wire to your telephone using a commercial telephone accessory. ( 15) When a call comes in, "CALL" appears. (The audio system pauses.) • To continue listening to the audio system during a call, press SRC. "CALL" disappears and the audio system resumes. When the call ends, "CALL" disappears. (The audio system resumes.) 10