Kenwood KDC-258U User Manual - Page 4

GETTING STARTED 1 Cancel the demonstration When you turn on the power (or after you reset the unit), the display shows: "CANCEL DEMO" "PRESS" "VOLUME KNOB" 1 Press the volume knob. [YES] is selected for the initial setup. 2 Press the volume knob again. "DEMO OFF" appears. 2 Set the clock 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [CLOCK], then press the knob. 3 Turn the volume knob to select [CLOCK ADJUST], then press the knob. 4 Turn the volume knob to make the settings, then press the knob. Day Hour Minute 5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob. 7 Press and hold to exit. (or) 1 Press and hold DISP SCRL to enter clock adjustment mode directly while in clock display screen. 2 Turn the volume knob to make the settings, then press the knob. Day Hour Minute To return to the previous setting item or hierarchy, press . 4 3 Set the initial settings 1 Press SRC to enter STANDBY. 2 Press the volume knob to enter [FUNCTION]. 3 Turn the volume knob to make a selection (see the following table), then press the knob. 4 Press and hold to exit. To return to the previous setting item or hierarchy, press . Default: XX AUDIO CONTROL SWITCH PREOUT REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear (through an external amplifier). SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance. DISPLAY EASY MENU (For KDC-258U / KDC-MP258U ) ON: Both display and button illumination change to white color when entering [FUNCTION]. ; OFF: Both display and button illumination remain as [COLOR SELECT] color. ( 11) TUNER SETTING PRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ AM). ; MIX: Memorizes one station for each preset button, regardless of the selected band. SYSTEM KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates. SOURCE SELECT PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. ( 8) IHEART SRC ON: Enables IHEARTRADIO in source selection. ; OFF: Disables. ( 9) BUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 8) CD READ 1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play as an music CD. No sound can be heard if an audio file disc is played. F/W UPDATE UPDATE SYSTEM F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/