Kenwood KDC-352U Instruction Manuals - Page 7

ENGLISH Main unit Remote controller SCRL DISP - General operation Changes the display information. Scrolls the display information if pressed and held. Enters clock adjustment mode directly (page 8) if pressed and held while in clock display screen. For : iPod - Selects "iPod" source. Enters the controlling mode (MODE ON/ MODE OFF) for iPod playback if pressed and held. (page 12) - For : Selects Random Play. (page 11) - AUD Enters [AUDIO CONTROL] / [AUDIO CTRL] settings directly. - ATT Attenuates the sound. • To return to the previous level, press the button again. Returns to the previous item. EXIT Exit from setting mode. (Press and hold on the main unit will also exit from the setting mode.) Getting started Canceling the display demonstration (except for ) The display demonstration is always turned on unless you cancel it. When you turn on the power (or after you reset the unit), the display shows: [CANCEL DEMO] \ [PRESS] \ [VOLUME KNOB] 1 Press the volume knob. [YES] is selected as the initial setup. 2 Press the volume knob again to confirm. [DEMO OFF] appears. If no operation is done for about 15 seconds or if you turn the volume knob to select [NO] in step 2, [DEMO MODE] appears and the display demonstration starts. Setting the demonstration mode 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [DEMO MODE], then press to enter. 3 Turn the volume knob to select [ON] or [OFF]. If [ON] is selected, display demonstration starts if no operation is done for about 20 seconds. 4 Hold to finish the procedure. Continued... 7