Kenwood KDC-BT31 Instruction manual - Page 17
Auto Pairing, BLUETOOTH - Mobile phone, Receive a call
View all Kenwood KDC-BT31 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
BLUETOOTH® Once pairing is completed, Bluetooth connection is established automatically. "BT1" and/ BLUETOOTH - Mobile phone or "BT2" indicator on the faceplate lights up. • This unit supports Secure Simple Pairing (SSP). • Up to 10 devices can be registered (paired) in total. • Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device, 16, [DEVICE DELETE]. • A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. • Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually. • Refer to the instruction manual of the Bluetooth device for more information. Auto Pairing When you connect iPhone/iPod touch/Android device to the USB input terminal, pairing request (via Bluetooth) is automatically activated. Press the volume knob to pair once you have confirmed the device name. Automatic pairing request is activated only if: - Bluetooth function of the connected devcie is turned on. - [AUTO PAIRING] is set to [ON]. ( 16) - KENWOOD MUSIC PLAY application is installed on the Android device ( [BROWSE MODE] is selected ( 8). 7) and Receive a call When there is an incoming call: • ZONE 2 illuminates in green color and flashes. • The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 15) During a call: • The display illuminates according to the settings made for [DISPLAY] ( 22) and ZONE 2 illuminates in green color. • If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected. The following operations ( 14) may differ or not available depending on the connected phone. ENGLISH 13