Kenwood KDC-BT31 Instruction manual - Page 26

DISPLAY SETTINGS TROUBLESHOOTING Default: XX DISPLAY COLOR SELECT Select color for ALL ZONE, ZONE 1 and ZONE 2 separately. 1 Select a zone. ( 21) 2 Select a color for the selected zone. VARIABLE SCAN/CUSTOM R/G/B/preset colors* To make your own color, select [CUSTOM R/G/B]. The color you have made will be stored in [CUSTOM R/G/B]. 1 Press the volume knob to enter the detailed color adjustment. 2 Press S / T to select the color (R/G/B) to adjust. 3 Turn the volume knob to adjust the level (0 - 9), then press the knob. DIMMER Dim the illumination. ON: Dimmer is turned on. ; OFF: Cancels. DIMMER TIME: Set the dimmer on and off time. 1 Turn the volume knob to adjust the [ON] time, then press the knob. 2 Turn the volume knob to adjust the [OFF] time, then press the knob. (Default: [ON]: PM 6:00; [OFF]: AM 6:00) BRIGHTNESS 1 Select a zone. ( 21) 2 LEVEL 0 to LEVEL 31: Select your preferred brightness level for the selected zone. TEXT SCROLL SCROLL AUTO/SCROLL ONCE: Select whether to scroll the display information automatically, or scroll only once. ; SCROLL OFF: Cancels. * Preset colors: RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1/ BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1/ GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/ORANGE2/ ORANGERED CD/USB/iPod Radio General Symptom Sound cannot be heard. "MISWIRING CHECK WIRING THEN PWR ON" appears. "PROTECTING SEND SERVICE" appears. • Sound cannot be heard. • The unit does not turn on. • Information shown on the display is incorrect. The unit does not work at all. • Radio reception is poor. • Static noise while listening to the radio. Disc cannot be ejected. Noise is generated. Tracks do not play back as you intended them to play. "READING" keeps flashing. Elapsed playing time is not correct. "LOADING" appears when you enter search mode by pressing . Remedy • Adjust the volume to the optimum level. • Check the cords and connections. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again. Send the unit to the nearest service center. Clean the connectors. ( 25) Reset the unit. ( 3) Connect the antenna firmly. Press and hold M to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit. ( 3) Skip to another track or change the disc. Playback order is determined when files are recorded. Do not use too many hierarchical levels or folders. This is caused by how the tracks are recorded. This unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later. 22 ENGLISH