Kenwood KDC-BT31 Instruction manual - Page 19

BLUETOOTH® Default: XX SETTINGS AUTO ANSWER 1 to 30: The unit answers incoming call automatically in the selected time (in seconds). ; OFF: Cancels. BATT/SIGNAL* AUTO: Shows the strength of the battery and signal when the unit detects a Bluetooth device and the Bluetooth device is connected. ; OFF: Cancels. Clock time is shown. * Functionality depends on the type of the phone used. Make a call You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature. 1 Press to enter Bluetooth mode. "(First device name)" appears. • If two Bluetooth phones are connected, press again to switch to another phone. "(Second device name)" appears. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. 4 Press and hold to exit. To return to the previous setting item, press . CALL HISTORY (Applicable only if the phone supports PBAP) 1 Press the volume knob to select a name or a phone number. • "INCOMING", "OUTGOING", or "MISSED" is shown on the lower part of the display to indicate the previous call status. • Press DISP to change the display category (NUMBER or NAME). • "NO DATA" appears if there is no recorded call history. 2 Press the volume knob to call. PHONE BOOK (Applicable only if the phone supports PBAP) 1 Turn the volume knob quickly to enter alphabet search mode (if the phonebook contains many contacts). The first menu (ABCDEFGHIJK) appears. * • To go to the other menu (LMNOPQRSTUV or WXYZ1 ), press J / K. • To select the desired first letter, turn the volume knob or press S / T, then press the knob. * Select "1" to search with numbers and select " " to search with symbols. 2 Turn the volume knob to select a name, then press the knob. 3 Turn the volume knob to select a phone number, then press the knob to call. • The phonebook of the connected phone is automatically transferred to the unit when pairing. • Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL • This unit can display only non-accent letters. (Accent letters such as "Ú" is showns as "U".) NUMBER DIAL 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +). 2 Press S / T to move the entry position. Repeat steps 1 and 2 until you finish entering the phone number. 3 Press the volume knob to call. (or using the remote control) 1 Press the number buttons (0 to 9) to enter the phone number. 2 Press to call. VOICE Speak the name of the contact you want to call or the voice command to control the phone functions. ( 16, Make a call using voice recognition) BATT LOW/MID/FULL*: Shows the strength of the battery. NO SIGNAL/LOW/MID/MAX*: Shows the strength of the current received signal. * Functionality depends on the type of the phone used. ENGLISH 15