Kenwood KDC-BT360U Instruction Manual - Page 28
Bluetooth®
View all Kenwood KDC-BT360U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Bluetooth® • Depending on the Bluetooth version, operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit. • Be sure to turn on the Bluetooth function of the device to make the following operations. • Signal conditions vary depending on the surroundings. Bluetooth - Connection Supported Bluetooth profiles - Hands-Free Profile (HFP) - Advanced Audio Distribution Profile (A2DP) - Audio/Video Remote Control Profile (AVRCP) - Serial Port Profile (SPP) - Phonebook Access Profile (PBAP) Supported Bluetooth codecs - Sub Band Codec (SBC) - Advanced Audio Coding (AAC) Connect the microphone Rear panel Microphone input jack Microphone (supplied) Secure using cord clamps (not supplied) if necessary. Adjust the microphone angle Pair and connect a Bluetooth device for the first time 1 Press B SRC to turn on the unit. 2 Search and select the name of your receiver ("KDC-X704"/ "KDC-X304"/"KDC-BT778HD"/"KDC-BT378U"/"KDC-BT360U"/ "KDC-BT34"/"KDC-BT278U"/"KDC-MP378BT"/"KMR-D378BT") on the Bluetooth device. "PAIRING" "PASS XXXXXX" "Device name" "PRESS" "VOLUME KNOB" appears on the display. • For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN) code immediately after searching. 3 Press the volume knob to start pairing. "PAIRING OK" appears when pairing is completed. Once pairing is completed, Bluetooth connection is established automatically. • / / / / / : "BT1" and/or "BT2" indicator on the faceplate lights up. " " indicator lights up to show the strength of the battery and signal of the connected device. • / / : "BT1" and/or "BT2" indicator on the display window lights up. • This unit supports Secure Simple Pairing (SSP). • Up to five devices can be registered (paired) in total. • Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device, see [DEVICE DELETE] on page 26. • A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. To connect or disconnect the registered device, see [PHONE SELECT] or [AUDIO SELECT] in [BT MODE]. (Page 26) However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices. (Page 27) • Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually. 22 ENGLISH