Kenwood KDC-BT848U Instruction Manual - Page 24
Tuner log memory time setting, 30SEC, 1MIN, or 5MIN, and then
UPC - 019048193179
View all Kenwood KDC-BT848U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Log memory Tuner Log memory time setting You can set the timing to log the station by the reception time. 1 Enter Function setting mode Press the Control knob for at least 1 second. 2 Select the Tuner log time set mode The item can be selected and determined as follows. "Settings" > "Log" > "Tuner Log Time Set" To select the item, turn the Control knob. To determine the item, press the Control knob. 3 Set the reception time for the timing to start logging the station Turn the Control knob to select time ("10SEC", "30SEC", "1MIN", "2MIN", or "5MIN"), and then press the Control knob. 4 Exit Function setting mode Press the [ ] button for at least 1 second. 24 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
24
|
KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
Log memory
Tuner Log memory time setting
You can set the timing to log the station by the
reception time.
±
Enter Function setting mode
Press the Control knob for at least 1 second.
²
Select the Tuner log time set mode
The item can be selected and determined as
follows.
“Settings”
>
“Log”
>
“Tuner Log Time Set”
To select the item, turn the Control knob. To
determine the item, press the Control knob.
³
Set the reception time for the timing to start
logging the station
Turn the Control knob to select time (“10SEC”,
“30SEC”, “1MIN”, “2MIN”, or “5MIN”), and then
press the Control knob.
´
Exit Function setting mode
Press the [
] button for at least 1 second.