Kenwood KDC-D300 Instruction Manual - Page 14

Troubleshooting Guide - cd player

Page 14 highlights

English Troubleshooting Guide The following messages are displayed on the centre unit when certain problems are occurring in your system. Take the recommended actions. E-01 EJECT NO PANEL E-30 E-04 E-99 No CD in the unit. ] Insert the CD. The faceplate of this unit has been removed. ] Replace it. The CD is quite dirty. The CD is upside-down. The CD is scratched a lot. ] Clean the CD and load it correctly. The unit is malfunctioning for some reason. ] Press the reset button on the centre unit. If the "E- 99" code does not disappear, consult your nearest service centre. E-0d HOLD The protective circuit in the unit activates when the temperature inside the CD player exceeds 60°C (140°F), stopping all operation. ] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the disc will start playing again. - 14 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

Troubleshooting Guide
— 14 —
English
The following messages are displayed on the centre unit when certain problems are occurring in your system. Take
the recommended actions.
No CD in the unit.
Insert the CD.
]
E-01
The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
Clean the CD and load it correctly.
]
E-04
The unit is malfunctioning for some reason.
Press the reset button on the centre unit. If the "E- 99" code does not disappear, consult your nearest service centre.
]
E-99
The protective circuit in the unit activates when the temperature inside the CD player exceeds 60°C (140°F), stopping all operation.
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the
disc will start playing again.
]
E-0d
EJECT
HOLD
The faceplate of this unit has been removed.
Replace it.
]
NO PANEL
E-30