Kenwood KDC-D300 Instruction Manual - Page 8

English Operations Eject A press of the 0 button stops the CD play and ejects the CD. 0 NOTE When you load a CD and eject it right away, the next time you try to insert the CD may not load. In such a situation, take the CD out for a moment and then reinsert it. Display Level Adjustment You can adjust the spectrum analyzer level. 1 Selecting CD play source mode. 2 Press the DISP button for at least one second. 3 Press either the ¢ or 4 button on the centre unit. Press the ¢ button:Level increased. Press the 4 button:Level decreased. (by 11 steps) Ending the display level adjustment mode: Press the DISP button. Theft Deterrent Faceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing Faceplate: Press the release button and drop open the faceplate. In its dropped condition, whilst drawing the faceplate to one side, pull it to the front and remove it. Release button £ CD PLAYER KDC-D300 INTEGRATED QUAD 1 BIT D/A CONVERTER DISP DIGITAL OPTIMUM SERVO CONTROL 60 120 250 380 500 750 1k 2k 4k DPAC 11BAND 8k 16k SPECTRUM ANALYZER NOTE • If the controls remain untouched for a period of 5 minutes or more after the panel has dropped open or been removed, the disc will automatically stop playing. (A warning beep starts sounding 30 seconds before play stops automatically.) • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case whilst detached. • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. -8-