Kenwood KDC MP225 Instruction Manual - Page 30
MP3/WMA source, If the following situations, consult your nearest service, center
UPC - 019048161000
View all Kenwood KDC MP225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
English Troubleshooting Guide ? A CD ejects as soon as it is loaded.62 ✔ The CD is quite dirty.63 ☞ Clean the CD, referring to the CD cleaning of the section on (page 8). ? Can't remove disc.64 ✔ The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. ☞ The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. ? The disc won't insert.65 ✔ There's already another disc inserted. ☞ Press the [0] button and remove the disc. ? Direct Search can't be done.66-1 ✔ Another function is ON. ☞ Turn Random Play or other functions OFF. ? Track Search can't be done.66-2 ✔ For the discs/folders first or last song. ☞ For each disc/folder, Track Search can't be done in the backward direction for the first song or in the forward direction for the last song. MP3/WMA source ? Cannot play an MP3/WMA.67 ✔ The media is scratched or dirty.69 ☞ Clean the media, referring to the CD cleaning of the section on (page 8). ? The sound skips when an MP3/WMA is being played.73-1 ✔ The media is scratched or dirty. ☞ Clean the media, referring to the section on (page 8). ✔ The recording condition is bad.73-2 ☞ Record the media again or use another media. ? The MP3/WMA track time isn't displayed correctly.80 ✔ --☞ There are times when it isn't displayed correctly according to the MP3/WMA recording conditions. If the following situations, consult your nearest service center: Even though the disc changer is connected, the Disc Changer source is not ON, with "AUX EXT" showing in the display during the Changer Mode. - 30 -